StyloPlan ← Back to the site

What's new

What changed in StyloPlan, update by update, newest first.

Three renders per look, duplexes, and a check before upload

  • NewA credit now covers up to three renders of a floor in each look. Not happy with a render? Render again is free twice, and the button says how many are left. A render our checks reject is still redone free and does not count.
  • NewThe free floor's images carry a small "Made with StyloPlan" mark. Any pack takes it off every image you have made. When your free floor is used, Studio says what the One home pack covers before you choose.
  • NewSide-by-side duplexes: in Review, say the plan shows more than one home, and the image prints the beds and baths for each home, such as DUPLEX · 2 BED · 1 BATH EACH.
  • NewBefore anything is traced, the upload says when a file looks like a site plan, an elevation, an office plan, an apartment building or a photo, so you can choose another file or carry on.
  • FixedOn plans where two rooms are labelled side by side, Review could put each name on the other room. It no longer does.
  • BetterThe upload page reads in one column, with the tips for the best result as three short points.

One credit, both looks

  • NewOne credit now renders a floor in both looks. Render it in Light or Dark, and the same floor in the other look is free. Studio's Render button says Free when it is.
  • NewDrop a plan file anywhere on Projects to start a new project with it.
  • BetterA home with several floors shows its beds, baths and size for the whole home, confirmed once in Review, on every floor. A main floor no longer prints 0 BED.
  • BetterStudio leads with Download. Render again sits beside it, a size smaller, and the fixes for a render fold under Export, opening by themselves when there is something to look at.

Stairs in 3D, bifold doors, and a faster Review

  • NewA Stairs section in the 3D view: each staircase goes up or down, turns either way, or lies flat if it was read wrong. Stairs that turn on winders and curved stairs are now built as stairs.
  • NewDraw a door now offers Bifold as well as Hinged, drawn like the closet doors on your plan. A copied door or window that is much wider or narrower than its new opening says so.
  • NewReview tells you when the tracing draws a staircase in a room where your plan shows none, so you can erase it before styling.
  • BetterReview and Studio open faster, and open faster still the second time.
  • BetterWhile you work in Fix the drawing, the steps fold to one line so the tools stay in view. Show brings them back.
  • BetterFewer sizes flagged as missing from your plan when they are printed on it in a light face.
  • FixedPlaces to look now runs on more light renders, and when it cannot check a render it says so instead of showing nothing.
  • FixedReview could say a plan could not be opened when it could, and its picture tabs could lie over Trace it again on a narrow window.

Every wall checked, and a way to tell us

  • NewSomething else looks wrong: in Studio, under Something wrong with the image?, and in the 3D view, under Windows and doors. Click the spot, say what is wrong in a sentence, and send it with the floor attached. We read every report and use it to make StyloPlan better.
  • BetterEach render is now checked for walls as well as for shape and text: a render that leaves walls of your drawing out, or draws a wall grey where the others are white, is not kept. It is redone free, and if no attempt passes, the credit comes back.
  • FixedIn the 3D view, a bifold closet could stand with two sets of doors, one inside the other. It now has one.
  • FixedPlaces to look could ring a car in the garage and name the room next door. A spot is now named after the room it is in, and garages are left out as they should be.

Patios in graphite, and the 3D in your look

  • BetterIn the dark look, patios, porches and decks are drawn in a graphite grey with a fine hatch, in place of the light beige that sat on the dark plan like a patch.
  • BetterOpen 3D view opens the model in the look you were working in, light or dark.
  • BetterDownloads and the pack: the paper of the plan meets the page around it without a visible edge.
  • BetterA new brand kit starts in a warm bronze until you set your own colour.
  • FixedA finished pack is announced once, with its file name.

Compare renders, and undo a delete

  • NewCompare side by side, under Renders in Studio: two of your renders of a floor next to each other before you choose one.
  • BetterDeleting a project or a floor gives you a few seconds to undo it, instead of asking first. A home on your website still asks.
  • BetterSomething wrong with the image? now says, for each kind of problem, where it is fixed and what it costs.
  • FixedA size like 11'-4" could print on the image as 11'. Every spelling of feet and inches now keeps its inches, and sizes written as 9/0 x 17/6 are read.

Take out what the render added, by hand

  • NewRemove a spot, under Check this render in Studio: drag a box over anything the render added that your plan does not have, or paint over it with the brush, then press Fill. It is filled from the floor around it, free, and Undo puts it back. It works on a phone too: tap the spot first.
  • BetterA larger shape the check marks now offers Remove by hand, where you mark it yourself, instead of only Render again.
  • BetterWhen a spot is part of the drawing you confirmed, Remove a spot keeps it and asks. If your plan does not have it, press Take it out anyway.
  • BetterThe 3D view, Review and Studio open faster: each page is now less than half the size it was.

Keep your earlier renders, and places to look

  • NewPlaces to look: in Studio's Check this render panel, orange rings mark anything the render drew that your confirmed drawing does not show, such as a shower or a water heater. Compare slides your drawing over the spot, and Remove it takes a small invented fixture out, free, matched to the floor tiles around it, with Undo. The rings never appear in a download.
  • NewA new render no longer replaces the one before it. In Studio, Renders lists the last three of each floor and look; pick the one you like best and your downloads and 3D use it. Switching is free.
  • BetterPricing now says what a rejected render costs (nothing, it is redone) and how long a 3D link stays up (as long as your account, with no hosting fee).

Rooms you can read in 3D, full screen, and a simpler Review

  • NewOn your website and on a shared link, a buyer taps a room in the 3D and the view glides to it, with its name and size large enough to read on a phone. Arrows step from room to room.
  • NewFull screen: the 3D on your website and on a shared link has a button above the zoom that fills the screen with the model; the X gives it back. Code you pasted before gets it too. On an iPhone it opens the model on its own page.
  • BetterWith a keyboard: Skip to content on every page goes past the header to the work, and the upload area takes Tab and Enter, so a plan can be chosen without a mouse.
  • BetterThe Differences switch is gone from Review: it could mark places that were fine. To check the drawing against your plan, press Check against my plan in the step No extra walls or doors, and use the Compare handle.

Porch posts, and a shared 3D that matches yours

  • NewPosts, under Windows and doors in the 3D view: the posts on a porch or deck, read from your plan. Remove one, put it back, or add one where your plan draws it.
  • New+ SUITE: in Review, say the home has a suite, and the spec line prints “+ SUITE” after the bedrooms.
  • NewHelp covers the new Posts list, updating the 3D on your website, and what you see at checkout.
  • BetterDoors in 3D: the short stretch of wall beside a doorway now stands, and each door hangs from its own wall.
  • BetterA light home loads on a light screen, and its picture on your website has a light button to match.
  • BetterA slow turn of the model no longer springs back while you are still holding it.
  • FixedA shared 3D now has the same walls and stairs as your own 3D view. For a home you shared before, press Update the version on my website once.

Fix the drawing with its own lines

  • NewCopy a door or window: click one that is drawn right, then click the wall where one is missing. It is the drawing's own symbol, turned to fit the wall, with Flip and Nudge to set it exactly.
  • NewDifferences marks, in one colour, where our drawing and your plan differ: a line we added, or a wall on your plan we left out. Places to look, not faults.
  • NewTroubleshoot, inside Help: common problems and what to do about them, with the page you are on first, and one search for everything.
  • BetterClose a wall fills a gap with the wall beside it, line for line, on straight and diagonal walls alike.
  • BetterEscape puts down whichever drawing tool is in your hand.
  • FixedCheck against my plan now appears on a floor you have already confirmed, and checks the drawing as you corrected it.

Studio starts where your plan wants it

  • NewStudio opens on the format that suits your plan's shape: landscape for a wide plan, portrait for a tall one, square otherwise. You can still switch.
  • BetterThe Render button gently pulses until a floor is rendered, so the one paid step is easy to find. Render again is quieter.
  • Better"Not rendered yet" now sits in Credits and notes instead of over your drawing.

A cleaner Studio and Review

  • BetterStudio's before/after handle stays where you leave it, and the rendered side keeps its labels, so you can check names on either side.
  • BetterNo more watermark across a drawing that is not rendered yet.
  • BetterThe info panel in Review and Studio floats over the stage, the same on both pages.
  • BetterOne loading bar across the app, so a wait looks the same wherever it happens.
  • BetterOn a phone, Review shows your plan first, then the steps.
  • FixedTracing a plan again no longer pushes the plan down the page.
  • FixedStray dots and dashes left behind where text is covered are cleaned up.
  • FixedA shared 3D page opens in your plan's look from the first moment, without a white flash.
  • FixedA brand change now reaches every published floor of a project, not only the one you edited.

Cleaner renders, faster pages, Help in the app

  • NewA new styling model: cleaner renders, and each plan is rendered at its own size and shape.
  • NewHelp opens inside the app: the steps for the page you are on, common questions and a search.
  • NewIn the 3D view, click a door or window on the model to find it in the list, add one in a doorway that was left open, and choose sliding, pocket or bifold doors.
  • BetterEvery page opens faster. The 3D view is ready in about 3.4 seconds on a phone, down from 5.5.
  • BetterThe 3D view reads more doors and windows from the drawing, including closet sliders, bifolds, pocket doors and doors onto a deck. You still check each one.
  • BetterThe app now has the same look as this site.
  • FixedDeleting a floor that had been shared works again.

Truer walls in 3D

  • BetterThe short walls between two windows or doors are built, where before they could go missing.
  • BetterWall corners in the 3D view stay square instead of rounding off.

Review, redesigned

  • NewReview puts its tools in a column on the left and your plan on one stage, with a handle to compare your plan with our drawing.
  • BetterA label you place sits in the same spot on every picture of the plan.
  • BetterLong room names can wrap, and labels land on their own words.

Sheets with several plans, a kit per project

  • NewUpload a sheet with several plans on it, and each plan is found and outlined so you can pick the floor you want.
  • NewEach project keeps its own brand kit, colours and font.
  • BetterA calmer Studio preview, simpler project cards and a 3D page with fewer panels.

Rename anything, railings that climb

  • NewRename a floor from its row, and a project from its menu.
  • BetterIn 3D, railings follow the stairs up and down and guard the open edges of a raised deck.
  • BetterThe 3D view zooms in to the scale of the house, not further.